LED PWM Controller Modul DC-DC 7-30Vin 1,2-28Vout 700mA 3W

LED PWM Controller Modul DC-DC 7-30Vin 1,2-28Vout 700mA 3W Step Down Buck Converter Module

LED PWM controller module 7-30Vin 700mA 3W © androegg

LED PWM controller module 7-30Vin 700mA 3W Pinout © androegg

Das LED PWM Controller Modul erlaubt Spannungsversorgungen von 7-30V und reguliert Ausgangsspannungen von 1,2-28V.

LED PWM Controller Modul

Die PWM Steuerung erfolgt einfach über den PWM Pin im Signalbereich von 2,8-6V.

Pinbelegung:

1. IN +: Stromversorgung positiv
2. IN-: negative Stromversorgung.
3. LED +: Spannungsversorgung LED-Anode
4. LED-: Spannungsversorgung LED-Kathode
5. PWM: PWM Signal (2,8-6V)

Bitte beachten, die Ausgangsspannung muß 2-3V unter der Eingangsspannung liegen.

The LED PWM controller module is a step down voltage converter in combination with a PWM controller.

Each of the 8 channels can be read directly by the digital I/O lines of a microcontroller unit.

The LED PWM controller module allows power supplies from 7-30V and regulates output voltages from 1.2-28V.

LED PWM Controller Module

The PWM signal control is simply done via the PWM pin with asignal range from 2.8 to 6V.

Pinout:

1. IN +: Power supply positive
2. IN-: negative power supply.
3. LED +: access the LED anode
4. LED-: then the LED cathode
5. PWM: pwm signal (2.8V-6V)

Because of buck operating output voltage must be 2-3V below input voltage.

LED PWM controller module Features:

• Input voltage: DC 7-30V (24V recommended)
• Input filter: capacitor
• Output Voltage :1.2-28V
• Output Current: 700mA
• Output current accuracy: + -3%
• Output current stability: @Vin = 24v, Vo = 1.2-22V, + -1%
• Limit frequency of the PWM signal: 20HZ-20KHZ Rated recommends: 1KHZ
• Internal power dissipation: Vin = 24v, 5LEDS maximum 700mW
• Temperature Coefficient: Temperature Environmental Protection -40 ° C – +71 ° C, + -0.015% / ° C
• Full load efficiency: 96%
• Ripple and noise (Vp-p): @Vin = 24v, 5LEDS, 120mv
• Output short circuit protection: sustainable
• Dimensions: 25 * 15 * 10 (mm) excluding pin